Siemens SITRANS FUH1010, Product Instruction Manual, Page: 100 / 264

Functions
7.4 Analog Out Setup
FUH1010 IP65 NEMA 4X Precision Volume
Operating Instructions, 01/2013, A5E32122003-AA
99
7.4 Analog Out Setup
The flow meter provides current, voltage and pulse-rate analog outputs. The [Analog Out
Setup] menu allows you to assign data functions for these signals. The transmitter terminal
strip contains the analog output terminals.
Table 7- 7 Analog Outputs
Io (Isolated Current) 4 to 20mA varies in proportion to an assigned
data function.
Vo (DC Voltage) 0 to 10 VDC varies in proportion to an assigned
data function.
Pgen (TTL Logic) 0 to 5000 Hz varies in proportion to an assigned
data function.
Table 7- 8 Analog Out Setup Data Categories
S LiquIdent m/s System sonic velocity compensated for
temperature.
S Viscosity System liquid viscosity.
S T1 Current liquid temperature.
S Vfo System spanned volumetric flow (unsigned).
S Vfab System spanned and signed absolute flow.
S Vs System sonic velocity.
S Valc System signal amplitude.
S Vaer System aeration number.
Iin1, Iin2, Iin3, Iin4 Represents a re-transmit of the analog input
signals (e.g., Pressure and Temp inputs can be
transmitted on the 4/20mA output).
Note
For Multi-Path flow meters: "1" = Path 1, "2" = Path 2, "3" = Path 3, "4" = Path 4 and "S"
represents the system or average channel. These characters appear to the left of the option
list parameter.
Io Output Functions
Note
4-20mA outputs also provide a fault indication by dropping to 2mA if assigned to flow rate
and under fault conditions.