Siemens SITRANS FUH1010, Product Instruction Manual, Page: 49 / 264

Connecting
5.5 Programming the Transmitter
FUH1010 IP65 NEMA 4X Precision Volume
48
Operating Instructions, 01/2013, A5E32122003-AA
Select Pipe Class
Pipe Class is a pre-loaded set of default pipe sizes for various ASA and metric pipes. If the
intended pipe is standard the user may select this function to pre-load necessary pipe data,
otherwise enter data manually using [Pipe O.D.], [Pipe Material] and [Wall Thickness].
1.
Press the <Right Arrow> to select Pipe Class. Press <Right Arrow> again and scroll to
desired Pipe Class.
2. Press <ENTER> to select.
3LSH'DWD
6LHPHQV 'XDO3DWK>@$%&
3LFN3LSH&ODVV
3LFN3LSH&ODVV $6$&DUE6WHHO
6HOHFW3LSH6L]H &6
3LSH2'LQ!
3LSH0DWHULDO 6WHHO
:DOO7KLFNQHVV
/LQHU0DWHULDO
1RQH
/LQHU7KLFNQHVV
7KHUP([S&RHI)
0RGRI(ODVW36,
3DWK
3. Pre-programmed Pipe Size and relevant pipe parameters will appear in menu cells. Press
<Right Arrow> and scroll to desired pipe size. Press <ENTER>. Enter dimensions
manually if pre-programmed dimensions do not match application.
Note
The DN sizes listed in the [Select Pipe Size] menu option list are referenced to DIN Table
2448. After selecting pipe size, check pipe OD and wall thickness for correct dimensions.
4. Press the <Left Arrow> and return to the main menu.
Select a Liquid Class
1. Press the <Down Arrow> and scroll to [Application Data].
2. Press the <Right Arrow> to select [Liquid Class].
3. Press the <Right Arrow> again and scroll to desired liquid.