SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07
79
Parameters
A
The device functions and parameters are listed below with the factory setting and setting
option. The menu code only appears in the local display.
Display
Table A- 1
Function group display parameters
Menu code Device function,
Parameters
Description
Factory setting
Setting options
1.1
Display Param. Setting parameter for the local display
Language
Language for user guidance
Deutsch
•
Englisch
•
Deutsch
•
Français
•
Italiano
•
Español
•
Nederlands
1.1.2
Line 1
Definition of measured values to be
displayed for line 1 in multi-display
Flow
•
Flow
•
Totalizer net
•
Flow velocity
•
Analog Val. 1, 2,
•
Frequency
1.1.3
Line 2
Definition of measured values to be
displayed for line 2 in multi-display
Totalizer net
•
Flow
•
Totalizer net
•
Flow velocity
•
Analog Val. 1, 2,
Frequency
1.1.4
Display flow
Selection for type of presentation of the
flow rate (% and bargraph only apply to
line 2)
When the "Flow" parameter has been
selected for lines 1 and 2, "Bargraph in %"
is always shown in line 2.
Engineering Unit
•
Engineering Unit
•
%
•
Bargraph in %
1.1.5
LCD lighting
Lighting of the display
On: permanently switched on
Off: automatic switch on by pressing key,
switch off after 10 min
.Off
•
On
•
Off
1.2
Multi-Display
Simultaneous display of two measuring
variables
(actual
measured value
line 1)
(actual
measured value
line 2)
•
Menu 1.1.2
•
Menu 1.1.3