manualshive.com logo in svg

Siemens SITRANS F M TRANSMAG 2, Operating Instructions Manual, Page: 105 / 114

Share
Download
Siemens SITRANS F M TRANSMAG 2 Operating Instructions Manual Download Page 105

 

Profibus Communication 

 

B.8 Device Database File (GSD) 

SITRANS F M TRANSMAG 2 
Operating Instructions, 11/2009, A5E00102775-07 

103

 

; If you don_t want to get the measuring value of a certain module ; from the device with the 

input data, use Free place for this module ; instead of another identifier. 
; 
; For the module 1 you have the choice between these different ; identifiers: 
; 
; - Free Place 
; - Short identifier format (identifier byte) 
; - Long identifier format (extended identifier) 
; 
; For the modules 2, 3 and 4 you have the choice between these ; different identifiers: 
; 
; - Free Place 
; - Long identifier format (extended identifier) 
; - Long identifier format, resettable (extended identifier) 
 
; With the "resettable" format it is possible to reset the totalizer, 
; transmitting suitable output data to the device. 
;--------------------------------------------------------------------- 
; Free place - usable for each module instead of another identifier 
;--------------------------------------------------------------------- 
Module = "Free place" 0x00 
0 
EndModule 
;--------------------------------------------------------------------- 
; Module 1 - Flow 
;--------------------------------------------------------------------- 
Module = "Flow" 0x94 
1 
EndModule 
;--------------------------------------------------------------------- 
; Module 2 - Quantity net 
;--------------------------------------------------------------------- 
Module = "Quantity net" 0x41, 0x84, 0x85 
2 
EndModule 
Module = "Resettable quantity net" 0xC1, 0x80, 0x84, 0x85 
3 

Summary of Contents for SITRANS F M TRANSMAG 2



















































































































Reviews:

No comments