Technical data
11
Siemens Building Technologies
Fire Safety & Security Products
02.2009
EN
SISTORE MX 3G
Video compression
Colour resolution
Video recording always takes place in YUV 4:2:2 true colour format.
The VGA board must be set to 16-bit mode (Hi-Color). Video compression is
made in JPEG format.
Video input
16 external composite inputs, YC signals are not supported.
Video output
4 outputs: CVBS, YC signals are not supported.
Video standard
PAL
Video scanning frequency
PAL 13,5 MHz
A/D conversion
PAL 1/100 s (20 ms) per field
Geometric resolution
PAL: 704 x 576 pixels with 2 fields
Optocoupler
Trigger and signal inputs
Number of trigger and signal inputs
16
Trigger edge
Positive or negative
Triggering of interrupts
Yes
Switching voltage
5 V ± 10 %
Switching current
Max. 5 mA
Digital inputs
Number of digital inputs
4
Triggering of interrupts
No
Digital outputs
Number of digital outputs
4
Output current
50 mA (max.), reversible fuse
Electrical isolation
Up to 2500 V
SISTORE MX systems are configured for DHCP by default.
If there is no DHCP server in the network, select the menu sequence
Administration>
Configuration
, then click the button
TCP/IP parameters
in the
Network
tab and enter a permanent
IP address instead of DHCP. Otherwise there may be quite a long waiting time as the system will wait
for a reply from the non-existent DHCP server.