Description of SISTORE MX / MX DVD
20
Siemens Building Technologies
Fire Safety & Security Products
02.2009
6.3 Behaviour
with
overheating
If the Error LED on the front of the device lights yellow, there are two possible
causes:
Overheating of the hard drive
Î
The running application cannot be stopped.
Î
A new application cannot be started.
Overheating of the processor
Î
The device will shut down automatically.
Î
When the device has cooled down sufficiently (min. 2 hours), it will boot up
automatically.
Possible causes
z
The device was not installed with a minimum clearance of 85 mm on both sides.
z
The ambient temperature is too high. See Section
71H
3
72H
Technical data.
Measures
1.
Pull the power plug and allow the device to cool down.
2.
Wait for at least 2 hours for the device to cool down.
3.
Check to ensure there is sufficient clearance on both sides of the device.
4.
Measure the ambient temperature. See Section
73H
3
74H
Technical data.
5.
Connect the power plug again.
6.
Restart the unit.
