manualshive.com logo in svg

Siemens SIREC D200, Manual

Share
Download
Siemens SIREC D200 Manual Download Page 78

72

43-TV-25-35   GLO   Iss.4   Dec 06   UK

A5E01001767-04

Power up

•   

DNS/WINS/MDNS

 - Set to Automatic, click on this to activate and de-activate options. 

DNS = Domain Name System, WINS = Windows Internet Name Service, MDNS = Man-
aged Data Network Services. 

See “DNS/WINS/MDNS” on page 72

•   

Ports

 - The Port numbers are associated with the IT system in use. Port numbers are 

set to a default but can be changed by the user to allow data traffic to use a specified 
port. 

See “Ports” on page 72

DNS/WINS/MDNS

(Main Menu > Configure > Setup > Edit Setup > Comms > TCP/IP > DNS/WINS/MDNS)

Set to Automatic, click on this to activate and de-activate options. DNS = Domain Name Sys-
tem, WINS = Windows Internet Name Service, MDNS = Managed Data Network Services.

•   

Auto DNS

 - This is a sub menu for DNS/WINS/MDNS. Toggles On and Off. With this 

deactivated the DNS Server address can be changed from the default, if required.

•   

Pri. DNS Address 

- This is a sub menu for DNS/WINS/MDNS. Only available when 

Auto DNS is deactivated.

•   

Sec. DNS Address 

- This is a sub menu for DNS/WINS/MDNS. Only available when 

Auto DNS is deactivated.

•   

Auto WINS

 - This is a sub menu for DNS/WINS/MDNS. Toggles On and Off. With this 

deactivated the Windows Internet Name Service can be changed from the default, if 
required.

•   

Pri. WINS Address

 - This is a sub menu for DNS/WINS/MDNS. Only available when 

Auto WINS is deactivated.

•   

Sec. WINS Address 

- This is a sub menu for DNS/WINS/MDNS. Only available when 

Auto WINS is deactivated.

•   

Auto MDNS

 - This is a sub menu for DNS/WINS/MDNS. Toggles On and Off. This will 

deactivate the Managed Data Network Services.

When the setup is complete go back to the TCP/IP menu and complete the Comms setup.

Ports

(Main Menu > Configure > Setup > Edit Setup > Comms > TCP/IP > Ports)

The port numbers are associated with the IT system in use. Port numbers are set to a default 
but can be changed by the user to allow data traffic to use a specified port.

•   

HTTP

 - HyperText Transport Protocol is the communications protocol that enables Web 

browsing. Select and enter the desired port number if required. (Defaults to 80)

•   

Modbus 

- communications protocol used for automation applications. Select and enter 

the desired port number if required. (Defaults to 502)

When the setup is complete go back to the TCP/IP menu and complete the Comms setup.

When the configuration is complete select the Finish button to Commit, Discard or Commit 
Later. Select the Back button to return to the previous menu.

Summary of Contents for SIREC D200































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands