manualshive.com logo in svg

Siemens SIREC D200, Manual

Share
Download
Siemens SIREC D200 Manual Download Page 113

43-TV-25-35   GLO   Iss.4   Dec 06   UK

107

A5E01001767-04

Power up

Save Layout

(Main Menu > Configure > Layout > Save)

Layouts can be saved from Compact Flash or USB removable storage media. Plug in a re-
movable storage media device and the corresponding button on the screen will become ac-
tive, select the relevant media button. 

Enter the filename required in the Filename box. Maximum of 50 characters. File format is 

.lay, 

click on the Save button.

The Compact Flash and the front USB device port are found under the front flap on the re-
corder. There is another USB port at the rear of the recorder. The first USB device fitted will 
be USB1, therefore the second USB device fitted is USB2. Compact Flash not available

 for 

the

 

SIREC D200

.

Load Layout

(Main Menu > Configure > Layout > Load)

Layouts can be loaded from Compact Flash or USB removable storage media. Plug in a re-
movable storage media device and the corresponding button on the screen will become ac-
tive. Select the relevant media button to display the layout files available to load. Select the 
file and click on the Load button.

All screens loaded on from another recorder, via Compact Flash or USB, or Screen Design-
er will over-write the existing screens on the recorder.

The Compact Flash and the front USB device port are found under the front flap on the re-
corder. There is another USB port at the rear of the recorder. The first USB device fitted will 
be USB1, therefore the second USB device fitted is USB2.

See “Storage Media Format” on page 120

 for formatting information of Compact Flash 

cards and USB keys.

Compact Flash not available

 for the

 

SIREC D200

 recorder.

When loading layouts from Screen Designer see 

“Loading a Layout into a Recorder” on 

page 166.

Summary of Contents for SIREC D200































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands