manualshive.com logo in svg

Siemens SIREC D200, Manual

Share
Download
Siemens SIREC D200 Manual Download Page 153

43-TV-25-35   GLO   Iss.4   Dec 06   UK

147

A5E01001767-04

Default Password Access

Default password access is set up within the recorder and can be changed by the Adminis-
trator or the Administrator can assign another user to change the access permissions.

Default permissions

•   

Administrator Access

 is for the Administrator level only

•   

Engineer Access

 is for Engineers and above (Administrator level)

•   

Supervisor Access

 is for Supervisors and above (incl. Engineer and Administrator levels)

•   

Technician Acces

s is for Technicians and above (incl. Supervisor, Engineer and Adminis-

trator levels)

•   

Operator Access

 is for Operators and above (incl. Technicians, Supervisors, Engineers 

and Administrator levels)

•   

No Login

 gives access only to unrestricted areas.

Access levels can change for each menu, for example Operator or above access is required 
to get to the Configure menu. Once in the Configure menu the operator level can only ac-
cess the Passwords button, Setup is Technician or above access and Layout and Settings 
are Supervisor or above access.

Summary of Contents for SIREC D200































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands