manualshive.com logo in svg

Siemens SIREC D200, Manual

Share
Download
Siemens SIREC D200 Manual Download Page 201

43-TV-25-35   GLO   Iss.4   Dec 06   UK

195

A5E01001767-04

Communications Server

ed by going to Administration, Preferences and ticking the Show Diagnostics box, this will 
display properties and vales of a selected device.

Add a Database

To add a database to a server, right click on the server eg. Local Server, select Add Data-
base and complete the dialog box details for the name and description of the device.

Add a Database Server

1.  Use the database icon with a + sign in the top left of the comms server window.

2.  Right click on Database Servers in the top left window

Connect to a Database Server

1.  Select ‘Database Servers’ in the left window and then right click on the server to be 

connected in the servers list in the main window. 

2.  Connect to database server dialog box will appear, enter an IP address and a descrip-

tion to identify the database server.

Delete a Database Server

1.  Right click on the database server to be removed and select the delete option. 

2.  A dialog box will appear with the IP address of the database server to be deleted. If this 

is correct, click on OK. 

All database servers can be removed except for the Local Server.

Summary of Contents for SIREC D200































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands