manualshive.com logo in svg

Siemens SIREC D200, Manual

Share
Download
Siemens SIREC D200 Manual Download Page 261

43-TV-25-35   GLO   Iss.4   Dec 06   UK

255

A5E01001767-04

Appendix F: Fuzzy Logging

What is Fuzzy Logging?

Fuzzy Logging

 is a real time Data Compression technique. 

Patent no. US 6,405,155 B2

, 

developed

 

as an alternative to the more standard methods of recording data.

Paperless Recorders are primarily used for exception recording. They spend most of their 
life trending and recording straight lines. Fuzzy Logging has been developed to improve the 
efficiency of data storage, and is particularly effective in exception recording examples 
where normal operation consists of generally static inputs.

Fuzzy Logging looks for straight lines in the data stream, in real time, whether they are hor-
izontal, climbing or descending. A straight line made up of say 10 points can be equally well 
represented by 2 points, one at either end, the other 8 points are redundant. Fuzzy logging 
works by creating straight lines in the data and discarding redundant points.

What’s it for? 

…… 

To help the user in the trade off between 

Scan Rate

, 

Disk capacity

 and 

Recording 

Time, 

after all

 

the ‘Pie’ is only so big.

Fuzzy Logging has been developed to help 
maximise all three sections, in effect increas-
ing the size of the ‘Pie’.

The result is a technique that delivers a host 
of real world benefits over the more traditional 
recording methods.

1.  Disks take longer to fill – changed less frequently, less site visits.

2.  Faster scan rates can be used for any given disk size – giving greater resolution on the 

process.

3.  Recording time can be extended.

4.  Less hard disk memory required for archiving on the PC.

5.  Quicker graphing of data.

6.  Smaller data files for remote collection.

How does it work?

Fuzzy Logging does not log data points that form part of a straight line.

The technique is best illustrated by the diagram below:

The Recording 'Pie'.

Scan Rate

Storage Capacity

Recording Period

Summary of Contents for SIREC D200































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands