Options and spare parts
B.1 Options
SINAMICS V20 Inverter
250
Operating Instructions, 07/2012, A5E03728167
The inverter displays "8 8 8 8 8" during transfer and the LED is lit up orange and flashes at 1
Hz. After a successful transfer, both P0010 and P0802 are automatically reset to 0. If any
faults occur during the transfer, see Chapter "Fault and warning codes (Page 233)" for
possible reasons and remedies.
Transferring data from MMC / SD card to inverter
There are two ways to perform a data transfer.
Method 1:
(Precondition: Inverter is to be powered up after inserting the card)
1.
Fit the option module to the inverter.
2.
Insert the card into the option module. Make sure the card contains the file "clone00.bin".
3.
Power on the inverter.
Data transfer starts automatically. Then the fault code F395 displays which means
"Cloning has occurred. Do you want to keep the clone edits?".
4.
To save the clone edits, press
OK
OK
and the fault code is cleared. When the clone file is
written to EEPROM, the LED is lit up orange and flashes at 1Hz.
If you do not wish to keep the clone edits, remove the card or the option module and
restart the inverter. The inverter will power up with the fault code F395 and r0949 = 10
indicating that the previous cloning was aborted. To clear the fault code, press
OK
OK
.
Method 2:
(Precondition: Inverter is powered up before inserting the card)
1.
Fit the option module to the powered inverter.
2.
Insert the card into the option module.
3.
Set P0003 (user access level) = 3.
4.
Set P0010 (commissioning parameter) = 30.
5.
Set P0804 (select clone file). This step is necessary only when the card does not contain
the file "clone00.bin". The inverter copies by default the file "clone00.bin" from the card.
6.
Set P0803 (transfer data from card to inverter) = 2.
The inverter displays "8 8 8 8 8" during transfer and the LED is lit up orange and flashes at 1
Hz. After a successful transfer, both P0010 and P0803 are automatically reset to 0.
Note that fault code F395 only occurs with power-up cloning.
