Options and spare parts
B.1 Options
SINAMICS V20 Inverter
Operating Instructions, 07/2012, A5E03728167
253
Baudrate
(bps)
Communication address
Display example
9600
0 ... 31
19200
0 ... 31
38400
0 ... 31
57600
0 ... 31
76800
0 ... 31
93750
0 ... 31
115200
0 ... 31
%DXGUDWH
$GGUHVV
In case of any communication errors, the screen displays "noCon" which means that no
communication connection has been detected. The inverter then automatically restarts
baudrate and address detection. In this case, check that the cable is correctly connected.
Mounting dimensions of the external BOP
The outline dimensions, drill pattern and cut-out dimensions of the external BOP are shown
below:
&XWRXW
Unit: mm
Fixings:
4 x M3 screws (length: 12 ... 18 mm)
Tightening torque: 0.8 Nm ± 10%
BOP Interface Module
Order number: 6SL3255-0VA00-2AA0
Functionality
This module can be used as an interface module for the external BOP, thus realizing the
remote control over the inverter by the external BOP. In addition, this module provides the
ability to upload / download parameter sets between the inverter and an MMC / SD card.
The module contains a communication interface for connecting the external BOP to the
inverter, a plug connector for connection to the expansion port on the inverter, and an MMC /
SD card slot. The module connects the external BOP to the inverter and provides the ability
of parameter cloning between the inverter and MMC / SD card.
