Siemens SINAMICS G120P PM330, Installation Manuals

Page: 10 / 98

Basic safety instructions
1.1 General safety instructions
Power Module PM330
10
Hardware Installation Manual, 10/2016, A5E32844552B AD
WARNING
Danger of an accident occurring due to missing or illegible warning labels
Missing or illegible warning labels can result in accidents involving death or serious injury.
•
Check that the warning labels are complete based on the documentation.
•
Attach any missing warning labels to the components, in the national language if
necessary.
•
Replace illegible warning labels.
NOTICE
Device damage caused by incorrect voltage/insulation tests
Incorrect voltage/insulation tests can damage the device.
•
Before carrying out a voltage/insulation check of the system/machine, disconnect the
devices as all converters and motors have been subject to a high voltage test by the
manufacturer, and therefore it is not necessary to perform an additional test within the
system/machine.
WARNING
Danger to life due to inactive safety functions
Inactive or non-adapted safety functions can trigger machine malfunctions that can cause
serious injury or death.
•
Observe the information in the appropriate product documentation before
commissioning.
•
Carry out a safety inspection for functions relevant to safety on the entire system,
including all safety-related components.
• Ensure that the safety functions used in your drives and automation tasks are adjusted
and activated through appropriate parameterizing.
•
Perform a function test.
• Only put your plant into productive operation once you have absolutely guaranteed that
the functions relevant to safety are operating correctly.