Siemens Simovert Masterdrive FANC-SB, Operating Instructions Manual

Page: 29 / 75

03.99 Communication via CC-Link
Siemens AG 6SE7087-6NX84-0GB0
SIMOVERT MASTERDRIVES Operating Instructions
4-9
Monitoring
code
Description According
scaling
parameter
Precision of Mitsubishi
data format (1 digit)
0000h { Monitor value is 0000 } -
0001h Output frequency P717 0.01 Hz
0002h Output current P715 0.01 A
0003h Output voltage P716 0.1 V
0004h { Monitor value is 0000 } -
0005h Frequency set value P717 0.01 Hz
0006h Operating speed P718 1 rotation/min
0007h Motor torque - 0.1 %
000Fh Input terminal status - -
0010h Output terminal status - -
8001h Optional actual value 1 - MASTERDRIVES format
8002h Optional actual value 2 - MASTERDRIVES format
8003h Optional actual value 3 - MASTERDRIVES format
8004h Optional actual value 4 - MASTERDRIVES format
8005h Optional actual value 5 - MASTERDRIVES format
8006h Optional actual value 6 - MASTERDRIVES format
8007h Optional actual value 7 - MASTERDRIVES format
8008h Optional actual value 8 - MASTERDRIVES format
Table 4-3 Monitor code
The monitoring values can be read in Mitsubishi inverter data format or
MASTERDRIVES data format (signed or unsigned); refer to chapter
4.9, "Data formats and data conversion". You select your data format
by the parameters P715 till P718.
The monitor values with monitor code
≤
0007 can be handled in both
data formats (depending on according scaling). The monitor values with
monitor code
≥
8001 are not converted. They have the original
MASTERDRIVES data format.
The monitor code 000Fh and 0010h shows some of the control bits
(remote IO bits):
Monitor Code 000Fh: input terminal status
Bit 15 Bit 9 Bit 8 Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0000.000 MRS JOG RH RM RL RT 0 STR STF
Bit 7 JOG is set if JOG1 (RYn5) or JOG2 (RYn7) is activated.
Monitor Code 0010h: output terminal status
Bit 15 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0000.0000.000 FU OL IPF SU RUN
All manuals and user guides at all-guides.com