Interfaces
3.2 DRIVE-CLiQ interface
SIMOTION D410-2
34
Manual, 02/2012
3.2
DRIVE-CLiQ interface
Properties
DRIVE-CLiQ has the following properties:
●
Automatic detection of components by the control unit
●
Independent expansion of components possible
●
Standardized interfaces to all components
●
Uniform diagnostics down to the components
●
Complete service down to the components
●
Mechanical parts are easy to use
For the DRIVE-CLiQ interface, 24 V / 450 mA are available to connect encoders and
measuring systems.
Interface characteristics
Table 3- 3
Interface X100
Characteristic
Type
Connector type
DRIVE-CLiQ connector
Maximum cable length
100 m
Data rate
100 Mbits
Connector type: RJ45 socket; blanking cover for DRIVE-CLiQ interface included in the scope of
delivery; blanking cover (50 pieces) Order no.: 6SL3066-4CA00-0AA0)
Interface assignment
Table 3- 4
Interface assignment X100
Representation
Pin
Name
Signal type
Description
1
TXP
O
Transmit data +
2
TXN
O
Transmit data -
3
RXP
I
Receive data +
4
Reserved, do not use
-
-
5
Reserved, do not use
-
-
6
RXN
I
Receive data -
7
Reserved, do not use
-
-
8
Reserved, do not use
-
-
A
+ (24 V)
VO
Power supply
%
$
B
M (0 V)
VO
Electronic ground
Signal type: I = Input; O = Output; VO = Voltage Output
