Spare parts / accessories
6.6 CUA31/CUA32 control unit adapter
SIMOTION D410-2
Manual, 02/2012
81
Additional references
Detailed information about the TM15 and TM17 High Feature can be found in the
SIMOTION
Terminal Modules TM15 / TM17 High Feature Commissioning Manual.
6.6
CUA31/CUA32 control unit adapter
Properties
You can connect a blocksize power module to the DRIVE-CLiQ interface using the CUA31
adapter module. The CUA32 adapter module also provides an encoder interface for an HTL,
TTL or SSI encoder.
Interfaces
Table 6- 5
Overview of the interfaces for the adapter modules
Interface
CUA31
1)
CUA32
DRIVE-CLiQ interface
3
3
EP terminals/temperature sensor connection
1
1
Power Module Interface (PM-IF)
1
1
24 V electronic power supply
1
1
Encoder interface (HTL, TTL, SSI)
Only SSI encoders without incremental tracks may be
operated.
0
1
Maximum DRIVE-CLiQ cable length
100 m
100 m
1)
CUA31 with order number 6SL3040-0PA00-0AAx (x ≥ 1 required)
CAUTION
The 50 mm clearances above and below the component must be observed. The ventilation
openings may not be covered by connecting cables.
Additional references
You will find more information on the CUA31/CUA32 control unit adapter in the
SINAMICS S120 AC Drive Manual.
