Technical data
4.2 Mechanical and climatic ambient conditions
SIMOTION D410-2
60
Manual, 02/2012
4.2
Mechanical and climatic ambient conditions
Conditions of use
SIMOTION D410-2 is designed for use in stationary, weather-protected locations.
SIMOTION D410-2 meets the conditions of use for Class 3C3 in accordance with
DIN EN 60721-3-3 (operating locations with high traffic densities and in the immediate
vicinity of industrial equipment with chemical emissions).
Use prohibition
Without additional measures, SIMOTION D410-2 may not be used in
●
Locations with a high percentage of ionizing radiation
●
Locations with extreme operating conditions, e.g.
–
Dust accumulation
–
Corrosive vapors or gases
●
In systems that require special monitoring, e.g.
–
Elevator installations
–
Electrical systems in particularly hazardous rooms
An additional measure for using SIMOTION D410-2 can, for example, be installation in
cabinets.
Ambient operating conditions for the operation
SIMOTION D410-2 may be used under the following ambient conditions:
Table 4- 2
Environmental requirements
Ambient conditions
Application range
Remarks
Climatic ambient conditions
Climate class
3K3
According to EN 60721-3
Permissible ambient temperature
0 to +55° C, up to 2000 m above
sea level
Maximum installation altitude
2000 m to max. 4000 m above sea
level
As of an altitude of 2000 m, the maximum
ambient temperature decreases by 7° C every
1000 m increase in altitude.
Relative humidity
5% to 95%
Condensation, icing, drip, spray
and splash water
Not permissible
Atmospheric pressure
620 to 1060 hPa
Corresponding height 4000 m - 0 m above sea
level
