Description
1.5 Type plates
SIMOTION D410-2
Manual, 02/2012
19
The interface to the power module (PM) is located at the rear of the SIMOTION D410-2.
Figure 1-5
Power Module Interface (PM-IF)
See also
1.5
Type plates
The following figure shows all the information that the type plate on the module rear side
contains.
Module designation
Order number
Serial number
HW version
C-Tick
CULUS
Figure 1-6
SIMOTION D410-2 DP type plate
Note
You might need to access the information provided on the rear-mounted type plate on the
module after it has been installed. We recommend that you make a note of any required
information prior to the installation because the type plate is hidden in the installed state.
