Siemens SIMOTICS M-1FE2, Configuration Manual

Page: 133 / 162

Connecting
8.2 Electrical connection
SIMOTICS M-1FE2 built-in motors
Configuration Manual, 05/2021, A5E50494252B AB
131
Connection overview for use of two power sections with VPM and encoder switch
1 Control cabinet
10 Encoder switch including adapter for signal cables at the input and output
11 Voltage limiting (VPM), only if the EMF > 820 V
12 Tripping unit for evaluating the PTC triplet
13 SMC20/SME20, encoder on the motor side, connector kits 6FX2003-0SA12, 12-pin
2 Power cable
3 DRIVE-CLiQ cable, trailable or conditionally trailable
4 Signal line, trailable or only conditionally trailable
4a Conductor in the signal cable from the PTC to the tripping unit
5 Signal connector, 17 pin, external thread, Article No.: 6FX2003-0SA17
Optional mounting flange for retrofitting, Article No.: 6FX2003-7DX00
6 1FE2 built-in motor
6a Ground connection
7 Temperature sensor (+1 Pt1000 spare)
8 Encoder
9 Terminal box
Figure 8-11 Connection overview with VPM and encoder switch