Mounting and connecting the HMI device
3.2 Mounting the device
Comfort Panels
40
Operating Instructions, 03/2012, A5E03404994-02
Proceed as follows:
1.
Insert the HMI device into the mounting cutout from the front.
2.
Insert the mounting clamp into the cutout provided on the HMI device.
3.
Tighten the mounting clamp with the threaded pin.
Note
Adhere to the permissible torque when tightening the threaded pin of the mounting clamp:
4" model: 0.2 Nm
7" to 22" models: 0.5 Nm
4.
Repeat steps 2 and 3 for all mounting clamps.
5.
Check the fit of the mounting seal.
Result
The HMI device is mounted and the relevant degree of protection is ensured at the front.
See also
