Operating a project
6.9 Closing the project
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
163
Requirement
Operating element with the configured infotext is selected.
Procedure
Proceed as follows:
1.
Press the <HELP> key.
The infotext for the operating element is displayed.
2.
Use the cursor keys to scroll as needed.
Note
Switching between displayed infotext
The configuration engineer can configure infotext for an I/O field and the associated
screen. You can switch between two infotexts by touching the infotext window.
3.
Close the window with the infotext.
Alternative procedure
Depending on your configuration, infotext can also be called via a configured operating
element.
Refer to your plant documentation to find any additional information on this topic.
6.9
Closing the project
Procedure
Proceed as follows:
1.
Use the corresponding operating element object to close the project.
Wait for the Loader to open after you closed the project.
2.
Switch off power to the HMI device.
