Siemens SIMATIC RF290R, Configuration Manual

Page: 88 / 110

ISO 15693 host commands
9.2 Supported ISO 15693 host command for ISO 15693 transponders
RF290R
88
Configuration Manual, 09/2014, C79000-G8976-C377-01
Command code Function Mode Comment
- - not addressed addresses Selection -
0x01 Inventory ✓ - - - -
0x02 Stay Quiet ✓ - ✓ - -
0x22 Lock Multiple
Blocks
✓ ✓ ✓ ✓ WR-OPTION = 0
1)
0x23 Read Multiple
Blocks
✓ ✓
2)
✓ ✓ DB-SIZE = 4
0x24 Write Multiple
Blocks
✓ ✓ ✓ ✓ DB-SIZE = 4
WR-OPTION = 0
1)
0x25 Select ✓ - ✓ - -
0x26 Reset to Ready ✓ ✓ ✓ ✓ -
0x27 Write AFI ✓ ✓ ✓ ✓ WR-OPTION = 0
1)
0x28 Lock AFI ✓ ✓ ✓ ✓ WR-OPTION = 0
1)
0x29 Write DSFID ✓ ✓ ✓ ✓ WR-OPTION = 0
1)
0x2A Lock DSFID ✓ ✓ ✓ ✓ WR-OPTION = 0
1)
0x2B Get System
Information
✓ ✓ ✓ ✓ -
0x2C Get Multiple
Block Security
Status
- - - - -
1) The WR-OPTION is set automatically by the reader if the WR-OPTION parameter in the "CFG4 transponder parameters"
is set to "00: specified automatically". With one request, up to two blocks can be written with data.
2) Reading a block in non-addressed mode is only possible if the "Read mode" parameter in the "CFG4 transponder pa-
rameters" is set to "b01: read once".
9.2.11 NXP (I-Code SLIX)
Chip ID: 2h = 00000001b (bits 47 - 40 of UID)
Table 9- 17 Memory arrangement 32 × 4 bytes = 1280 bits
Number of blocks 28 (user range: 0 ... 27)
Block size 4 bytes
Number of pages 10 (user range: 0 ... 9)
Page size 16 bytes = 4 blocks