manualshive.com logo in svg

Siemens SIMATIC NET SCALANCE S615, Configuration Manual, Page: 264 / 320

Share
Download
Siemens SIMATIC NET SCALANCE S615 Configuration Manual Download Page 264

● Shared Secret Conf.

Enter your access ID again as confirmation.

● Max. Retrans.

Here, enter the maximum number of retries for an attempted request.

The initial connection attempt is repeated the number of times specified here before another 

configured RADIUS server is queried or the login counts as having failed. As default 3 retries 

are set, this means 4 connection attempts. The range of values is 1 to 5.

● Primary Server

Using the options in the drop-down list, specify whether or not this server is the primary 

server. You can select one of the options "yes" or "no".

● Test

With this button, you can test whether or not the specified RADIUS server is available. The 

test is performed once and not repeated cyclically.

● Test Result

Shows whether or not the RADIUS server is available:
– Not reachable

The IP address is not reachable.

The IP address is reachable, the RADIUS server is, however, not running.

– Reachable, key not accepted

The IP address is reachable, the RADIUS server does not, however accept the shared 

secret.

– Reachable, key accepted

The IP address is reachable, the RADIUS server accepts the specified shared secret.

Procedure

Entering a new server
1. Click the "Create" button. A new entry is generated in the table. 

The following default values are entered in the table:
– RADIUS Server Address: 0.0.0.0
– Server Port: 1812
– Max. Retrans.: 3
– Primary server: No

2. In the relevant row, enter the following data in the input boxes:

– RADIUS Server Address
– Server Port
– Shared Secret
– Shared Secret Conf
– Max. Retrans.: 3
– Primary server: No

Configuring with Web Based Management
4.9 "Security" menu

SCALANCE S615 Web Based Management

264

Configuration Manual, 11/2019, C79000-G8976-C388-08

Summary of Contents for SIMATIC NET SCALANCE S615

































































































































































































































































































































Reviews:

No comments