background image

Description

The following fields are displayed:
● VRID Errors

Shows how many VRRPv3 packets containing an unsupported VRID were received.

● Version Errors

Shows how many VRRPv3 packets containing an invalid version number were received.

● Checksum Errors

Shows how many VRRPv3 packets containing an invalid checksum were received.

The table has the following columns:
● Interfaces

Interface to which the settings relate.

● VRID

Shows the ID of the virtual router. Valid values are 1 ... 255.

● Address Type

Shows the version of the IP protocol.

● Become Master

Shows how often this virtual router changed to the "Master" status.

● Advertisements Received

Shows how many VRRPv3 packets were received.

● Advertisement Interval Errors

Shows how many bad VRRPv3 packets were received whose interval does not match the 

value set locally.

● IP TTL Errors

Shows how many bad VRRPv3 packets were received whose TTL (Time to live) value in the 

IP header is incorrect.

Configuring with Web Based Management

4.4 "Information" menu

SCALANCE S615 Web Based Management

Configuration Manual, 11/2019, C79000-G8976-C388-08

107

Summary of Contents for SIMATIC NET SCALANCE S615

































































































































































































































































































































Reviews: