manualshive.com logo in svg

Siemens SIMATIC NET SCALANCE S615, Configuration Manual

The Siemens SIMATIC NET SCALANCE S615 Operating Instructions Manual is available for free download on our website. This comprehensive manual provides users with detailed instructions and guidance on how to operate and maximize the potential of their SCALANCE S615 device. Visit manualshive.com to access the manual and enhance your product experience.

Share
Download
background image

Description

The table has the following rows:
● Status

Shows the status of the PLUG. The following are possible:
– ACCEPTED

There is a PLUG with a valid and suitable configuration in the device.

– NOT ACCEPTED

Invalid or incompatible configuration on the inserted PLUG.

– NOT PRESENT

There is no C-PLUG or KEY-PLUG inserted in the device.

– FACTORY

PLUG is inserted and does not contain a configuration. This status is also displayed 

when the PLUG was formatted during operation.

– MISSING

There is no PLUG inserted. Functions are configured on the device for which a license 

is required.

● Device Group

Shows the SIMATIC NET product line that used the C-PLUG or KEY-PLUG previously.

● Device Type

Shows the device type within the product line that used the C-PLUG or KEY-PLUG 

previously.

● Configuration Revision

The version of the configuration structure. This information relates to the configuration 

options supported by the device and has nothing to do with the concrete hardware 

configuration. This revision information does not therefore change if you add or remove 

additional components (modules or extenders), it can, however, change if you update the 

firmware.

● File System

Displays the type of file system on the PLUG.

● File System Size

Displays the maximum storage capacity of the file system on the PLUG.

● File System Usage

Displays the memory utilization of the file system of the PLUG.

● Firmware on PLUG (as of firmware version 4.3)

When enabled, the firmware will be stored on the PLUG. This means that automatic 

firmware updates/downgrades can be made with the PLUG.

Configuring with Web Based Management

4.5 "System" menu

SCALANCE S615 Web Based Management

Configuration Manual, 11/2019, C79000-G8976-C388-08

181

Summary of Contents for SIMATIC NET SCALANCE S615

































































































































































































































































































































Reviews:

No comments

Related manuals for SIMATIC NET SCALANCE S615

ZyXEL Communications ENTERPRISE NETWORK CENTER Manual preview
ENTERPRISE NETWORK CENTER
Brand: ZyXEL Communications Pages: 302
IBASE Technology FWA5104 series User Manual preview
FWA5104 series
Brand: IBASE Technology Pages: 33
PaloAlto Networks PA-415 Quick Start Manual preview
PA-415
Brand: PaloAlto Networks Pages: 2
XRoads Networks EdgeXOS Platform Notes preview
EdgeXOS
Brand: XRoads Networks Pages: 4
Watchguard XCS 280 Hardware Manual preview
XCS 280
Brand: Watchguard Pages: 20
Stonesoft FW-105 series Installation Instructions Manual preview
FW-105 series
Brand: Stonesoft Pages: 31
FIBER SENSYS Fiber Defender FD348R Application Note preview
Fiber Defender FD348R
Brand: FIBER SENSYS Pages: 31
Draytek Vigor2860 Series Quick Start Manual preview
Vigor2860 Series
Brand: Draytek Pages: 76

Brands by name

Popular brands

Load more brands