Siemens SIMATIC NET CP 343-2, Manual

Page: 60 / 140

5 Using the Command Interface
60
CP 343−2 / CP 343−2 P AS−Interface Master
Release 08/2008
C79000−G8976−C149−04
Table 6-3 AS-i Slave Commands, continued
Name Coding Return Parameter
Get_LPS, Get_LAS, Get_LDS, Get_Flags
−> described in section 5.2.16 LDS, LAS, LPS, flags 3 0
H
Get_Extended_Total_Configuration
−> described in section 5.2.17 Actual configuration,
current parameters,
LAS, flags
3 9
H
Store_Extended_Total_Configuration
−> described in section 5.2.18 Total
configuration 3 A
H
Write_Extended_Parameter_List
−> described in Section 5.2.19 Parameter list 3 C
H
Read_Extended_Parameter_Echo_List
−> described in section 5.2.20 Parameter echo list 3 3
H
Read_write_CTT2_request
−> Description see Section 5.2.21 Slave address
CTT2 string CTT2 string 4 4
H
Read_Version_ID
−> described in section 5.2.22 Version string 1 4
H
Read_AS-i_Slave_ID
−> described in section 5.2.23 Slave address ID code 1 7
H
Read_AS-i_Slave_Extended_ID1
−> described in section 5.2.24 Slave address Extended ID1 code 3 7
H
Write_AS-i_Slave_Extended_ID1
−> described in section 5.2.25 Extended ID1 code 3 F
H
Read_AS-i_Slave_Extended_ID2
−> described in section 5.2.26 Slave address Extended ID2 code 3 8
H
Read_AS-i_Slave_I/O
−> described in section 5.2.27 Slave address I/O configuration 1 8
H
Get_LPF
−> described in section 5.2.28
LPF
3 E
H
Write_AS-i_Slave_Parameter_String
−> described in section 5.2.29 Slave address,
parameter string 4 0
H
Read_AS-i_Slave_Parameter_String
−> described in section 5.2.30 Slave address Parameter string 4 1
H
Read_AS-i_Slave_ID_String
−> described in section 5.2.31 Slave address ID string 4 2
H
Read_AS-i_Slave_Diagnostic_String
−> described in section 5.2.32 Slave address Diagnostic string 4 3
H
General Structure of the Send Buffer
The basic structure of the send buffer for commands is shown below. The bytes
only relevant with certain commands are shown on a gray background.