5
Using the Command Interface
80
CP 343−2 / CP 343−2 P AS−Interface Master
Release 08/2008
C79000−G8976−C149−04
5.2.17
Get_Extended_Total_Configuration
Meaning
With this command, the following data are read from the CP 343-2:
S
The list of active AS-i slaves (LAS) This indicates which of the connected AS-i
slaves are activated.
S
The current configuration data of the connected AS-i slaves (I/O configuration
and ID code).
S
The current parameters of the AS-i slaves (actual parameters)
S
The current flags.
This command can, for example, be used to find out the configuration of the
stations connected to the AS-i cable after installation. The configuration data read
in can, if necessary, be modified and saved on the CP 343-2 as the expected
configuration using the command ‘Configure Total System’ (see Section 5.2.18).
Structure of the Job Data in the Send Buffer
Byte
Meaning
0
Command number: 39
H
Structure of the Response Data in the Receive Buffer
Byte
Meaning
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
0
00H
1
00H
2
reserved
LAS slave
1
LAS slave
2
LAS slave
3
LAS slave
4
LAS slave
5
LAS slave
6
LAS slave
7
3
LAS slave
8
LAS slave
9
LAS slave
10
LAS slave
11
LAS slave
12
LAS slave
13
LAS slave
14
LAS slave
15
4
LAS slave
16
LAS slave
17
LAS slave
18
LAS slave
19
LAS slave
20
LAS slave
21
LAS slave
22
LAS slave
23
5
LAS slave
24
LAS slave
25
LAS slave
26
LAS slave
27
LAS slave
28
LAS slave
29
LAS slave
30
LAS slave
31
6
reserved
LAS slave
1B
LAS slave
2B
LAS slave
3B
LAS slave
4B
LAS slave
5B
LAS slave
6B
LAS slave
7B
7
LAS slave
8B
LAS slave
9B
LAS slave
10B
LAS slave
11B
LAS slave
12B
LAS slave
13B
LAS slave
14B
LAS slave
15B
