Siemens SIMATIC NET CP 343-2, Manual

Page: 57 / 140

5 Using the Command Interface
57
CP 343−2 / CP 343−2 P AS−Interface Master
Release 08/2008
C79000−G8976−C149−04
Table 6-2 Error Coding, continued
DONE Meaning STATUS ERROR
0 1 80C6
H
Data record transfer aborted due to priority class abort
(warm restart or background) of the distributed I/Os.
0 0 8181
H
Job active (no error)
0 1 8182
H
ID from block execution with STARTUP=TRUE (not an
error)
0 1 8184
H
Data type of the RECV formal parameter illegal
0 1 8185
H
Communications errors with the AS−i master
0 1 8381
H
The AS-i slave address is incorrect
0 1 8382
H
The AS-i slave is not activated (not in LAS).
0 1 8383
H
Error on the AS-Interface
0 1 8384
H
Command not permitted in the current status of the AS-i
master.
0 1 8385
H
An AS-i slave with address 0 exists.
8386
H
The AS-i slave has illegal configuration data (I/O or ID
codes).
0 1 83A1
H
The addressed AS-i slave was not found on the
AS-Interface.
0 1 83A2
H
An AS-i slave with address 0 exists.
0 1 83A3
H
An AS-i slave with the new address already exists on the
AS-Interface.
0 1 83A4
H
The AS-i slave address cannot be deleted.
0 1 83A5
H
The AS-i slave address cannot be set.
0 1 83A6
H
The AS-i slave address cannot be stored permanently.
0 1 83A7
H
Error reading the extended ID1 code.
0 1 83A8
H
The target address is not plausible (for example a B slave
address was used for a standard slave).
0 1 83B1
H
A length error occurred transferring a string.
0 1 83B2
H
A protocol error occurred transferring a string.
0 1 83F8
H
The job number or the job parameter is unknown.
0 1 83F9
H
The AS-i master has detected an EEPROM error.
0 1 8F22
H
Area length area reading a parameter
8F23
H
Area length error writing a parameter
This error code indicates that a parameter is entirely or
partly outside the address area or that the length of a bit
array of an ANY parameter cannot be divided by 8.
0 1 8F24
H
Area error reading a parameter
8F25
H
Area error writing a parameter
This error codes indicates that a parameter is located in an
area that is illegal for a system function.
0 1 8F28
H
Alignment error reading a parameter