Siemens SIMATIC NET CP 343-2, Manual

Page: 59 / 140

5 Using the Command Interface
59
CP 343−2 / CP 343−2 P AS−Interface Master
Release 08/2008
C79000−G8976−C149−04
5.2 Description of the AS-i Slave Commands
Overview
This section describes the command calls that can be sent by the user program to
the CP 343-2. With these command calls, the CP 343-2 provides the complete
functionality of the master profile M4 of the AS-i master specification. How to use
the jobs is explained in the descriptions of the individual jobs, the PICS appendix
and the explanations in /1/ and /2/.
Table 6-3 AS-i Slave Commands
Name Parameter Return Coding
Set_Permanent_Parameter
−> described in section 5.2.1 Slave address,
parameter 0 0
H
Get_Permanent_Parameter
−> described in Section 5.2.2 Slave address Parameter 0 1
H
Write_Parameter
−> described in section 5.2.3 Slave address,
parameter Parameter echo
(optional) 0 2
H
Read_Parameter
−> described in section 5.2.4 Slave address Parameter value 0 3
H
Store_Actual_Parameters
−> described in section 5.2.5 0 4
H
Set_Extended_Permanent_Configuration
−> described in section 5.2.6 Slave address
Configuration data
to be created 2 5
H
Get_Extended_Permanent_Configuration
−> described in section 5.2.7 Slave address Specified configuration 2 6
H
Store_Actual_Configuration
−> described in Section 5.2.8 0 7
H
Get_Extended_Actual_Configuration
−> described in Section 5.2.9 Slave address Actual configuration 2 8
H
Set_LPS
−> described in section 5.2.10 LPS 2 9
H
Set_Offline_Mode
−> described in section 5.2.11 Mode 0 A
H
Select_Autoprogramming
−> described in section 5.2.12 Mode 0 B
H
Set_operation_mode
−> described in section 5.2.13 Mode 0 C
H
Change_AS-i_Slave_Address
−> described in Section 5.2.14 Address 1,
Address 2 0 D
H
Get_AS-i_Slave_Status
−> described in Section 5.2.15 Slave address Error record of the AS-i
slave 0 F
H