manualshive.com logo in svg

Siemens SIMATIC MP 270B, Operating Instructions Manual

Share
Download
Siemens SIMATIC MP 270B Operating Instructions Manual Download Page 86

Operating system and configuration 

 

6.2 Windows CE Control Panel 

 

TP 270, OP 270, MP 270B (WinCC flexible) 

6-16

 

Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0 

 

Caution 
If too much memory is provided for the DRAM file system, runtime has too little working 

memory available. Therefore, in the case of incorrect settings, there is no guarantee that the 

runtime can run properly. 

 

 

Caution 
The operation of runtime together with the Internet Explorer can only be guaranteed when 

runtime either does not use the Present option or the runtime-capable configuration (*.few) 

generated is a maximum of 2 NB. 

 

 

Note 
Operation of additional applications together with WinCC flexible 
The memory requirements of projects in WinCC flexible has changed in comparison to 

ProTool. 
If user-specific additional applications should be operated on the HMI device together with a 

WinCC flexible project, the functionality required on the HMI device must be tested and, if 

necessary, the scope of the project or additional application reduced.  

See also 

Open Control Panel  (Page 6-2) 

6.2.11 UPS 

Uninterruptible power supply (UPS) 

To prevent the loss of data in the event of a power failure (during the logging of process 

values or alarms, for example), a UPS can ensure a controlled shutdown of the HMI device. 

An external UPS detects the failure of the power supply and signals this to the HMI device 

via the serial interface.  
The UPS can only be loaded as an option. 

"UPS" option 

 

The UPS driver is transferred as an option to the HMI device with WinCC flexible or the 

ProSave service tool. After transfer, the relevant "UPS" option appears in the Windows CE 

Control Panel. 

Summary of Contents for SIMATIC MP 270B



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands