manualshive.com logo in svg

Siemens SIMATIC MP 270B, Operating Instructions Manual

Share
Download
Siemens SIMATIC MP 270B Operating Instructions Manual Download Page 107

 

Prepare and backup project 

 

7.4 Other transfer functions 

TP 270, OP 270, MP 270B (WinCC flexible) 
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0 

7-15

 

7.4.2 Backup 

and 

Restore 

Introduction 

Using WinCC flexible or the ProSave Service Tool, it is possible to backup and restore 

projects, recipes and passwords. 
If the service tool was installed with WinCC flexible, it can be opened on the configuration 

computer with the command "SIMATIC > ProSave" in the "Start" menu. 
ProSave is an executable program which can run without WinCC flexible. ProSave can, thus, 

be run without a WinCC flexible license. 

Requirements 

• 

The HMI device is connected to a configuration computer. 

• 

WinCC flexible or ProSave must have been installed on the configuration computer. 

 

 

 

Notice 
Close all open applications on the configuration computer before starting Backup or 

Restore. 

 

Backup 

During the backup process, the project is transferred from the HMI device Flash memory to 

the configuration computer.  
There are two ways to make a backup copy: 

• 

Backup using standalone ProSave 

• 

Backup using WinCC flexible 

 

 

 

Notice 
Licenses on the HMI device are not saved in this case. 

 

The procedure for the backup differs in terms of the operations performed on the 

configuration computer. 

Summary of Contents for SIMATIC MP 270B



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands