Siemens SIMATIC IPC677E Operating Instructions Manual Download

Page: 53 / 158

Mounting and connecting the device

3.3 Connecting the device

SIMATIC IPC677E
Operating Instructions, 04/2019, A5E45117996-AA

Motherboard

DPP1

DPP2

DVI-D

Variant 2
Monitor 1

DVI

VGA

Monitor 2

DVI

VGA

1) - via DP to DVI-D adapter

2) - via DP-VGA adapter

3.3.5

Connecting the device to networks

The following options are available for the integration in existing or planned system

environments or networks:

Ethernet

The integrated Ethernet port (10/100/1000 Mbps) can also be used for communication and

data exchange with automation devices such as SIMATIC S7.

This functionality requires the "SOFTNET S7" software package.

PROFINET

PROFINET can be operated via

●

Standard Ethernet interfaces (RT)

Additional information

Additional information is available in the catalog and the online ordering system Technical

support (

https://support.industry.siemens.com/cs/ww/en/

Summary of Contents for SIMATIC IPC677E































































































































































Search results

Summary of Contents for SIMATIC IPC677E

Reviews:

Related manuals for SIMATIC IPC677E

Brands by name

Popular brands

Siemens SIMATIC IPC677E, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC IPC677E

Reviews:

Related manuals for SIMATIC IPC677E

Brands by name

Popular brands