manualshive.com logo in svg

Siemens SIMATIC 627B, Operating Instructions Manual

Share
Download
Siemens SIMATIC 627B Operating Instructions Manual Download Page 94

Maintenance and service 

 

11.1 Removing and installing hardware components 

 

SIMATIC Box PC 627B 

92

 

Operating Instructions, 06/2008, A5E00927393-02 

11.1.6

 

Installing / removing the motherboard 

Preparation 

1.

 

Isolate the device from mains and disconnect all connection cables. 

2.

 

Open the device. 

Removing the motherboard 

 

How to remove the motherboard 
1 

Remove the drive bay module for the hard disk and DVD burner. 

2 

Loosen the screws (1). Remove the 

module bracket (2). 

 

 

 

3 

Remove the power supply cover. 

4 

Remove the bus board. 

5 

Remove the power supply. 

6 

Disconnect all cables from the motherboard, noting down their positions while doing so. 

7 

Remove the screws (1) (6 pieces) and then the screws (2) (4 pieces). Remove the processor 

heat sink. 

Summary of Contents for SIMATIC 627B





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands