Siemens SIMATIC 627B Operating Instructions Manual Download Page 11

Page: 11 / 244

SIMATIC Box PC 627B
Operating Instructions, 06/2008, A5E00927393-02

Introduction

1.1

Preface

Purpose of this document

These operating instructions contain all the information you need for commissioning and

using the SIMATIC Box PC 627B.
It is intended both for programming and testing personnel who commission the device and

connect it with other units (automation systems, additional programming devices), as well as

for service and maintenance personnel who install add-ons or carry out fault/error analyses.

Scope of validity of this document

This documentation applies for all variations of the SIMATIC Box PC 627B and describes the

delivery status as of June 2008.

Its place in the information landscape

These operating instructions are available on the "Documentation and Drivers" CD included

with your product.
For further instructions on how to handle the software, please refer to the corresponding

manuals.

Conventions

The abbreviation Box PC or device is also used within this documentation for the product

name SIMATIC Box PC 627B. The abbreviations CP for CP 1616 onboard and Vista for

Windows Vista Ultimate are also used.

History

Currently released versions of these operating instructions:

Edition

Comment

05/2007

First Edition

06/2008

•

Remedy

•

New operating system: Windows Vista Ultimate

•

Functionality: additional CP 1616 onboard

Summary of Contents for SIMATIC 627B





















































































































































































































































Search results

Summary of Contents for SIMATIC 627B

Reviews:

Brands by name

Popular brands

Siemens SIMATIC 627B, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC 627B

Reviews:

Brands by name

Popular brands