Siemens SIMATIC 627B, Operating Instructions Manual

Page: 72 / 244

Expansions and programming
10.3 Installing PCI / PCI Express cards
SIMATIC Box PC 627B
70
Operating Instructions, 06/2008, A5E00927393-02
10.3 Installing PCI / PCI Express cards
10.3.1 Notes on the modules
The device is designed for use with modules conforming to PCI specifications V 2.2. PCI
modules with 5 V and 3.3 V supply voltage and PCI Express x4 modules can be used. The
permissible module dimensions are specified in the "Dimensional drawings" section.
10.3.2 Installing / removing expansion modules
Preparation
Disconnect the device from the mains.
Installing expansion modules
How to install an expansion module (PCI / PCI express card):
1 Open the device.
2 Remove the fastening screw (1)
and remove the module bracket
(2).
3 Remove the slot cover (5) from the
intended slot.
4 Insert expansion module (4) into
the slot provided.
Observe the guide rail (6) with long
PCI modules.
5 Mount the module bracket and
insert the slider (3).
6 Screw down the steel slot cover (5)
for the expansion module.
7 Close the device.