manualshive.com logo in svg

Siemens SIMATIC 627B, Operating Instructions Manual

Share
Download
Siemens SIMATIC 627B Operating Instructions Manual Download Page 187

 

Detailed descriptions 

 

16.4 BIOS Setup 

SIMATIC Box PC 627B 
Operating Instructions, 06/2008, A5E00927393-02 

185

 

SATA Port 0, SATA Port 1, SATA Port 2, SATA Port 3 

The system jumps to the following submenu when you select this type of menu field: 

 

Figure 16-8  SATA Port 0 (example) 

 

[User] 

Select “User” to enter a user-specific definition of the hard disk 

type. Configure all the other options, for example, Cylinder, Heads, 

Sectors/Track, or other properties of the hard disk drive. 

 [Auto] 

The parameters which you can select in this dialog are usually 

saved to the respective IDE drive. The "Auto" setting in the "Type" 

field means that these values are automatically read from the drive 

and written to memory. 
If Type is selected for a drive that does not exist, a timeout is 

triggered within approximately 1 minute and the entries remain 

unchanged. It makes sense only to set "Auto" for interfaces to 

which a drive is connected. 

[CD/DVD-ROM]  CD/DVD-ROM is connected 
[ATAPI 

Removable] 

A removable data volume is connected 

Type 

[None] 

Select "None" if you have not connected a disk drive. This setting 

reduces system waiting time. 

The number of blocks (sectors) transferred per interrupt are defined at the "Multi-

Sector Transfer" option. The value depends on the drive and should only be set by 

way of "Auto" setting at the "Type" field. 

Multi-Sector 

Transfer 

Disabled 

2, 4, 8, 16 sectors 

Summary of Contents for SIMATIC 627B





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands