manualshive.com logo in svg

Siemens SIMATIC 627B, Operating Instructions Manual

Share
Download
Siemens SIMATIC 627B Operating Instructions Manual Download Page 186

Detailed descriptions 

 

16.4 BIOS Setup 

 

SIMATIC Box PC 627B 

184

 

Operating Instructions, 06/2008, A5E00927393-02 

 

[User] 

Select “User” to enter a user-specific definition of the hard disk 

type. Configure all the other options, for example, Cylinder, Heads, 

Sectors/Track, or other properties of the hard disk drive. 

 [Auto] 

The parameters which you can select in this dialog are usually 

saved to the respective IDE drive. The "Auto" setting in the "Type" 

field means that these values are automatically read from the drive 

and written to memory. 
If Type is selected for a drive that does not exist, a timeout is 

triggered within approximately 1 minute and the entries remain 

unchanged. It makes sense only to set "Auto" for interfaces to 

which a drive is connected. 

[CD/DVD-ROM]  CD/DVD-ROM is connected 
ATAPI 

Removable 

A removable data volume is connected 

Type 

None 

Select "None" if you have not connected a disk drive. This setting 

reduces system waiting time. 

The number of blocks (sectors) transferred per interrupt are defined at the "Multi-

Sector Transfer" option. The value depends on the drive and should only be set by 

way of "Auto" setting at the "Type" field. 

Multi-Sector 

Transfer 

Disabled 

2, 4, 8, 16 sectors 

LBA Mode 

Control 

The "Enabled" setting at the "LBA Mode Control" (enabled, disabled) option means 

that hard disk capacities greater than 528 MB are supported. The value depends on 

the drive and should only be set by way of "Auto" setting at the "Type" field. 
The type of access to the drive is determined in the 32-bit I/O field 
Disabled 

16-bit access 

32-bit I/O 

Enabled 

32-bit access (default) 

Transfer 

Mode or Ultra 

DMA Mode 

Define the data transmission rate of the interface in these fields. The value depends 

on the drive and should only be set by way of "Auto" setting at the "Type" field. 
Exit the submenu by pressing ESC. 

Summary of Contents for SIMATIC 627B





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands