manualshive.com logo in svg

Siemens SIMATIC 627B, Operating Instructions Manual

Share
Download
Siemens SIMATIC 627B Operating Instructions Manual Download Page 129

 

SIMATIC Box PC 627B 
Operating Instructions, 06/2008, A5E00927393-02 

127

 

Troubleshooting/FAQs 

13

13.1

 

General problems 

 

This chapter provides you with tips on how to localize and troubleshoot frequently occurring 

problems. 

 

Problem  

Possible causes 

Remedy 

There is no power supply 

to the device. 

•

 

Check the power supply, the network cable and the power plug. 

•

 

Check if the On/Off switch is in the correct position. 

The device is not 

operational 

Device is being operated 

outside the specified 

ambient. conditions 

•

 

Check the ambient conditions. 

•

 

After transport in cold weather, wait approximately 12 hours 

before switching on the device. 

Windows no longer 

boots 

Settings in the BIOS 

Setup are incorrect 

•

 

Check the setting in the BIOS Setup "SATA/PATA Configuration" 

submenu 

•

 

Check the setting in the BIOS Setup Boot menu 

The monitor is switched 

off. 

Switch on the monitor. 

The monitor is in "power 

save" mode. 

Press any key on the keyboard. 

The brightness button has 

been set to dark. 

Increase the screen brightness. For detailed information, refer to the 

monitor operating instructions. 

•

 

Check whether the power cord has been properly connected to 

the monitor and to the system unit or to the grounded shockproof 

outlet. 

•

 

Check whether the monitor cable has been properly connected to 

the system unit and to the monitor. 

The external monitor 

remains dark. 

The power cord or the 

monitor cable is not 

connected. 

If the monitor screen still remains dark after you have performed 

these checks, please contact your technical support team. 

The mouse driver is not 

loaded. 

Check if the mouse driver is correctly installed. 

The mouse pointer 

does not appear on 

the screen. 

The mouse is not 

connected. 

Check whether the mouse lead is connected to the system unit. If you 

are using an adapter or extension for the mouse lead, check the 

connectors. 

Should the mouse cursor still not be visible on-screen after 

completing these checks and measures, contact technical support. 

Wrong time and/or 

date on the PC. 

 

1.

 

Press <F2> during the boot sequence to open BIOS Setup. 

2.

 

Set the time and date in the setup menu. 

Summary of Contents for SIMATIC 627B





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands