Siemens SIMATIC 627B Operating Instructions Manual Download Page 194

Page: 194 / 244

Detailed descriptions

16.4 BIOS Setup

SIMATIC Box PC 627B

192

Operating Instructions, 06/2008, A5E00927393-02

Entry

Meaning
[Enabled]

Onboard monitoring functions are enabled.

[Disabled]

No monitoring functions.

SafeCard functions

The relevant driver and the application must be started for operation of the

monitoring functions.
[Enabled]

The fan speed is controlled based on the temperature.

Fan Control

[Disabled]

The fan always runs at full speed.

[Disabled]

Only one CRT or DVI monitor is driven.

Dual view DVI/CRT

[Enabled]

When a CRT and a DVI monitor are connected, both are

activated.

Auto

BIOS detects whether another graphics module is inserted and

switches over depending on the "Default Primary Video Adapter"

setting.

Onboard Graphics

(IGD)

Disabled

The integrated graphics is disabled in the chipset. This setting

should only be selected if another graphics card is installed.

* This menu item depends on the device features

Note
The second Ethernet interface support is OS dependent. For DOS based applications (e.g.

Image Creator) please use the first Ethernet interface.

Note
For or operation without a monitor (= headless operation), Dual view DVI/CRT should be set

to "Disabled".

Summary of Contents for SIMATIC 627B





















































































































































































































































Search results

Summary of Contents for SIMATIC 627B

Reviews:

Brands by name

Popular brands

Siemens SIMATIC 627B, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC 627B

Reviews:

Brands by name

Popular brands