Siemens SIMATIC 627B Operating Instructions Manual Download Page 238

Page: 238 / 244

Glossary

SIMATIC Box PC 627B

236

Operating Instructions, 06/2008, A5E00927393-02

Troubleshooting

Error cause, cause analysis, remedy

V.24 interface

V.24 is a standardized interface for data transfer. Printers, modems, and other hardware

modules can be connected to a V.24 interface.

Wake on LAN (WoL)

Wake on Local area network. This function enables the PC to be started via the LAN

interface.

Warm restart

The restart of a computer after a program was aborted. The operating system is loaded and

restarted again. The CTRL+ ALT+ DEL hotkey can be used to initiate a warm restart.

Windows

Microsoft Windows is a multitasking graphical user interface. Windows provides a standard

graphical interface based on drop-down menus, windowed regions on the screen, and allows

operation with a pointer device such as a mouse.

WLAN

Wireless LAN is a local network that transmits data via radio waves, infrared light or another

wireless technology. Wireless LAN is mainly used for mobile computer applications in office

or factory environments.

Summary of Contents for SIMATIC 627B





















































































































































































































































Search results

Summary of Contents for SIMATIC 627B

Reviews:

Brands by name

Popular brands

Siemens SIMATIC 627B, Operating Instructions Manual

Search results

Summary of Contents for SIMATIC 627B

Reviews:

Brands by name

Popular brands