SIJECT
OP15B
Screens
SIJECT 15/16 Operation Manual
3-39
Fast mold open (MldOpn 2)
－
set the position, pressure and flow of fast
mold open.
Slow mold open (MldOpn 3)
－
set the position, pressure and flow of
slow mold open.
Mold open tolorence (MldOpnTol)
－
set the allowed tolorence of mold
open end position. When mold is within this tolorence, then the system
will consider the mold is opened to the end.
Mold position (MldPos)
－
display the actual position of the mold.
Press
key to close the mold manually
，
and press
key to
open the mold manually.
