SIJECT OP15B Screens
SIJECT 15/16 Operation Manual June, 2003
3-34
Fig 3-28
Service screen 2.2 – lubrication picture
Operating sequences
On service screen 1, press softkey F2
to enter service screen 2 --
- linear scale setting. Then press softkey F3
to enter lubrication
setting screen. See Fig. 3-28 Service Screen 2.2 --- lubrication picture.
Lubrication time and lubrication count can be set here.
Lubrication Time
--- every lubrication time can be set here, ranged from
0.0
～
99.9sec.
Lubrication Count
--- set one cycle here and the system will be
lubricated automatically. The range is from 1 to 9999.
Lubrication Status
--- Press softkey F1 “manual lubrication” to start the
lubrication, then the box will backlight, and
is flashing.
Lubrication Oil Level
--- Inform the user to add lubrication oil when the
oil level is very low, then the box will backlight and alarm occurs, i.e.,
is flashing.
