Siemens SIGMASYS C, Manual

Page: 59 / 138

8 Transponders and loop elements
Multifunctional Danger Control and Indicating Panels SIGMASYS C and M (M-Modules) 51 / 128
Best.Nr. A24205-A337-B970 – Edition 12 (03/07)
SIGMALOOP Splitter is installed in the SIGMASYS control and operating panel or in a similar
in option slot 2 in the SIGMASYS C control and operating
system housing adjacent to the control and operating panel.
There is room for five SIGMALOOP Splitters on a 110mm top-hat rail.
This configuration can be installed
panel. For all other control and operating panels, it can be installed in a free option slot.
Figure 7: Physical connection
The outgoing spurs must be clamped in consecutive order (without gaps), starting with the
first terminal pair. Thus, the terminal pair must first be assigned for spur 1, then spur 2 and so
on. At least one element must be connected to the spur in use. Spurs not in use (3, 4 or 5)
remain unassigned.
List of connectable detectors (use only detectors ≥ Version 11)
SDF1200 SIGMABASE smoke
SDF2200 SIGMAPLUS smoke detector 1 )
detector
1
manual call point
1
)
1
e
can be connected to a SIGMALOOP Splitter:
max. 32
max. 10
SDT2100 SIGMASYS heat detector )
SDF3100 SIGMAEXPERT smoke detector
SDF3500 SIGMAEXPERT combo detector
SMF3110 SIGMASYS manual call point
SMF3120 SIGMASYS
SPF3500 SIGMASYS BMT transponder )
SPF3110 SIGMASYS detector display
1 )
SPF5100 SIGMACONTROL Control modul
SPF3200 Indicator panel control facility
1)
VdS-approved for unshielded lines.
In accordance with VDE 0833 the following
Automatic detectors
Non-automatic detectors