manualshive.com logo in svg

Siemens Sicore II, Installation And Commissioning Manual, Page: 74 / 86

Share
Download
Siemens Sicore II Installation And Commissioning Manual Download Page 74

Commissioning

Sicore II Installation and Commissioning Guide

667/HB/52600/000 Issue 2    Unrestricted

74

7.10. License Installation

Licenses are installed onto Sicore II at the time of manufacture and are stored internally on
the camera not accessible to the user.

The installed licences can be viewed by navigating to :

Status and Configuration / Settings / Licence System

The

Facilities menu will displayed the items that can be licensed and whether they have a

licence installed.

Selecting

Manager and then Read Licences will directly display the installed licenses.

There are two licenses for Sicore II:

ANPR – All cameras will have this licence to enable the ANPR engine.

Enforcement – This enables the Speed, Baseline Position and Encryption functions within the
camera.

If a function is configured but not licensed then a fault will be present in the

Fault Table (ref

para. 4.6.4) indicating this.

Summary of Contents for Sicore II























































































Reviews:

No comments