Product Features Description
Sicore II Installation and Commissioning Guide
667/HB/52600/000 Issue 2 Unrestricted
18
3.3.
Product Variants and Options
The Sicore II camera is available in a wide number of variants and can be factory configured
with the following options:
Variant
Description
1
Twin Camera – Mono/IR + Colour Overview
2
Twin Camera – Mono/IR + Mono/IR Overview
3
Single Camera – Mono/IR
Table 4 – Table of Base Variants
Option
Description
1
3G/4G Modem module with antenna
2
WiFi module with antenna
3
8GB solid state storage module \
4
16GB solid state storage module |
5
32GB solid state storage module | Only one can be fitted
6
64GB solid state storage module |
7
128GB solid state storage module /
8
12.5mm Lens
9
16mm Lens
10
25mm Lens
11
35mm Lens
12
Grey sun shield
13
Yellow sun shield
Table 5 – Table of Options
Each Sicore II has two part numbers located on the rear of the camera.
The formal, orderable, part number is of the form S24745 –XXXXX-XXXX. This is the number
which must be quoted when ordering a camera.
To allow easy identification of the camera, there is also a ‘Human Readable’ part number
included on the rear of the camera. The structure of this is described in Appendix C
Please contact Siemens to discuss orderable part numbers for the different
variants using contact details in Section 1.2