Replacing a C-PLUG.
Removing a C-PLUG
A
1. Turn off the power to the device.
2. Loosen the screws of the cover.
3. Remove the cover.
4. Insert a screwdriver between the front edge of the C-PLUG (A) and the slot and release the C-
PLUG.
5. Remove the C-PLUG.
6. Close the cover (tightening torque =.8 Nm), to ensure that the device is closed and water and
dust proof.
Note
Loss of the configuration
The "RESET (Page 33)" button is located directly beside the slot for the C-PLUG. The button
cannot be used to remove the C-PLUG.
If you hold down the "RESET" button, you reset all settings of the device to the factory defaults.
Remove the C-PLUG with a screwdriver.
Description of the device
4.6 C-PLUG
SCALANCE XP-200
Operating Instructions, 03/2021, C79000-G8976-C428-08
39
