Siemens Pointek CLS500 Operating Instructions Manual Download Page 88

Page: 88 / 118

Page 82

Pointek CLS500 – INSTRUCTION MANUA

7ML19985GG03

mmmmm

Appendix A

Keylock Level

Controls the access protection level for the device. The factory setting is a protection
level of 0, which places no restriction on modification of settings.

•

Protection level 1 disables the ability to set a value by pressing two buttons
simultaneously.

•

Protection level 2 disables the ability to change a value by stepping it up or down.

•

Protection level 3 completely disables all changing of values.

1. Set the rotary switch to F.
2. Press the RED (+) or BLUE (–) button to change the setting.

Notes:

HART settings override local settings.

•

If the HART setting is 0, there are no restrictions, and you cannot change the
protection to a higher level locally.

•

If the HART setting is 3, no changes can be made, and this protection level
cannot be changed locally.

Menu
Item

Rotary
Switch
Position

Left
Arrow

Protection

Display

Level

Description

local
settings

HART
settings

* No restrictions

PL 0

No restrictions

PH 0

Disables 2-button
adjustments

PL 1

PH 1

Disables 1-button
adjustments

PL 2

PH 2

Disables all changes PL 3

PH 3

Summary of Contents for Pointek CLS500























































































































Search results

Summary of Contents for Pointek CLS500

Reviews:

Siemens Pointek CLS500, Operating Instructions Manual, Page: 88 / 118

Search results

Summary of Contents for Pointek CLS500

Reviews: