Siemens MicroSAM Operating Instructions Manual Download Page 54

Page: 54 / 138

Description

3.6 Functions

MicroSAM

Operating Instructions, 06/2012, C79000-G5376-C560-07

The LEDs behind the inspection window of your chromatograph provide you with an initial

overview of the status of your gas chromatograph. They have the following meanings:

LED

Meaning if the LED lights up

Power

24 V supply voltage present.

Heartbeat

Software sign-of-life

Ready

Chromatograph is ready.

Maint. Req.

Chromatograph has a maintenance request.

Failure

Chromatograph has an alarm.

Sample flow

No sample flow

Health status (left)

Ethernet connection has been established.

Health status (right)

Communication is taking place.

The text box displays the following information:
1.

Sample stream: S1, S2, S3, S4

Sample components: e.g. CO

, propane etc.

Measured value of sample as numeric value

Summary of Contents for MicroSAM











































































































































Search results

Summary of Contents for MicroSAM

Reviews:

Siemens MicroSAM, Operating Instructions Manual, Page: 54 / 138

Search results

Summary of Contents for MicroSAM

Reviews: