Siemens HiPath 500 Operating Manual Download

Page: 75 / 106

Group functions

Step-by-Step

Night destination off

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

Press the On-hook key to end the process.

Checking the number of waiting calls

You can check the number of waiting calls for the group.

Press the Talk key.

Call the system menu.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

> <

[

Select and confirm the menu item.

Press the On-hook key to end the process.

Mulap group (Multiple Line Applica-
tion)

If your handset’s line belongs to a Mulap group (Multiple
Line Application), then you can
•

answer calls for the group (press the Talk key in
group calls)

•

make external telephone calls under the group
phone number (the group phone number is stored
in the called party’s caller list, for example )

•

activate and deactivate the group call function for
your handset’s line

•

forward the lines of the Mulap group to internal or
external destinations

Menu

Service?

UCD Menu?

#404=UCD night off?

Menu

Service?

UCD Menu?

*405=Calls in
queue?

Summary of Contents for HiPath 500











































































































Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands

Siemens HiPath 500, Operating Manual

Search results

Summary of Contents for HiPath 500

Reviews:

Related manuals for HiPath 500

Brands by name

Popular brands